中文 / EN

12 hot news about offshore wind power (2021.06.05-06.11)

2021/06/11 Source:ChinaOffshoreWind


1. Shandong Province launched 10 million kilowatts of offshore wind power during the 14th Five-Year Plan

The Shandong Provincial Energy Bureau recently issued a public announcement on the "Opinions on Promoting the High-quality Development of Renewable Energy in the Province". Among them, the "Opinions" pointed out: speed up the development and construction of offshore wind power bases, during the "14th Five-Year Plan" period, the province's offshore wind power will strive to start 10 million kilowatts; build an integrated wind and solar storage base, make full use of the northern Shandong salt-alkali beach and the southwestern Shandong mining In coal subsidence areas, develop photovoltaic power generation, wind power and other renewable energy sources according to local conditions, and build an integrated (wind) photovoltaic storage base; by 2025, the (wind) photovoltaic integrated storage base will strive to build an operational capacity of about 20 million kilowatts.

Source: Polaris Wind Power Network


2. The first "million kilowatt-level" offshore wind power base set multiple records

The Three Gorges Yangjiang Shapa Offshore Wind Power Project is located in the sea area south of Shapa Town, Yangjiang City, Guangdong Province. It has a total installed capacity of 1.7 million kilowatts and a total of 269 offshore wind turbines. The project has built 3 sea booster stations, using 220 kV submarine cables. Access to the land-based centralized control center. This project is the first "million kilowatt-level" offshore wind power base in China, and is a pioneer in the development of my country's offshore wind power on a large scale.

The project innovatively used a variety of construction techniques and foundation forms, among which multiple foundation forms such as suction tube jacket, single-column composite tube, core-column rock-socketed jacket, and large-diameter four-pile jacket were used for the first time in China and completed. At present, the jacket foundation of the inclined pile-socketed rock-socketed sea rising pressure station is the only one in the domestic offshore wind power industry. At the same time, the project has set a record of domestic offshore wind power construction speed many times during the construction process.

It is estimated that after the completion of the Yangjiang Offshore Wind Power Project, it will provide 4.7 billion kilowatt-hours of on-grid electricity, which can meet the annual electricity consumption of about 2 million modern households. Compared with coal-fired power plants of the same scale, it can save about standard coal every year. 1.5 million tons of carbon dioxide emission reduction of about 4 million tons will provide strong support for the transformation of the energy structure of the Guangdong-Hong Kong-Macao Greater Bay Area.

Source: Three Gorges Micro


3. The first floating offshore wind power semi-submersible foundation platform was successfully launched

On the morning of June 8, the construction of the first domestic floating offshore wind power semi-submersible foundation platform was completed in Zhoushan, Zhejiang Province, and the ship was launched, marking that my country’s first floating wind power test prototype project has entered a new stage, and the domestic floating wind turbine foundation has been obtained. The new breakthrough in platform construction has laid a solid foundation for Three Gorges Group to build a high-quality floating wind power demonstration project.

The floating foundation platform was developed and constructed by the Three Gorges Group, and was undertaken by Wison Marine Engineering. The overall platform width is 91 meters, the depth is 32 meters, the design draft is 13.5 meters, and the wind farm has a displacement of more than 13,000 tons. It can withstand the complex and complicated South China Sea Harsh extreme sea conditions. The floating wind power test prototype has a stand-alone capacity of 5,500 kilowatts, an impeller diameter of 158 meters, and a full power generation capacity of 5,500 degrees per hour. It can provide green and clean energy for 30,000 households each year.

Source: China Three Gorges Energy


4. Official signing of a 100 billion-level offshore wind power project

In response to the national call for energy conservation, emission reduction, and the development of circular economy, and to speed up the development and utilization of clean energy in Nan'ao County, on the morning of June 2, Nan'ao County and Three Gorges Guangdong Branch held a signing ceremony for the cooperation framework agreement for offshore wind power projects.

It is understood that in the context of the “3060” dual-carbon target proposed by the state, the Guangdong Branch of the Three Gorges Company, based on the development of the Yangdong Project of the Three Gorges, further cooperated in the development of the five offshore wind power projects at the Yuedong site adjacent to Nan'ao County. The total investment scale of the project is approximately RMB 100 billion. Three Gorges Guangdong Branch will use this offshore wind power resource development cooperation as an opportunity to promote the deep-sea technology innovation of offshore wind power, actively promote the process of offshore wind parity pricing, and explore the combination of offshore wind power and local construction, environmental friendliness, and fishery and tourism. Promote local social and economic development.

Source: South Australia Radio and Television Station


5. The world's first anti-typhoon floating offshore wind turbine assembly is off the assembly line

A few days ago, the world’s first anti-typhoon floating offshore wind turbine was assembled and tested off the assembly line at the Yangjiang Offshore Wind Power Industry Base in Guangdong Province. The off-line floating wind turbine set off the assembly line marked the upcoming installation and application of the first domestic offshore floating test prototype. .

Its core power-5.5MW offshore floating wind turbine adopts a platform-based and modular development design concept. Based on the maturity of 6.45MW wind turbine platform products, it integrates innovative technologies and reduces the technology of offshore floating platforms. Risk, with extremely high reliability and cost-effectiveness. The unit uses intelligent sensor monitoring technology to monitor the running status of the wind turbine online. When the unit is at full power, it generates 5,500 kWh per hour, which can provide 30,000 households with green and clean energy power every year.

Source: Dongfang Wind Power Network


6. The drilling rate of the world's first Type Ⅲ single pile breaks a domestic record

Recently, the world's first pressurized drilling vertical roadheader developed by China Jiaotong Tianhe completed the largest offshore rock-socketed single pile drilling in China in just 26 days, setting a new type III single pile drilling record.

The offshore wind power project is located in the sea area of Xiuyu District, Putian City, Fujian Province, and has 19 sets of 7 MW offshore wind turbines. In order to make these giants stand more stable, the researchers designed a hole with a depth of 25.4 meters, which is equivalent to a 9-story building. After the machine pile is driven into the seabed rock, the depth of the rock-socketed hole in the weakly weathered hard rock is 18.4 meters, and the hole diameter is 7 meters.

According to reports, the equipment has a maximum lifting force of 900 tons and a maximum drilling diameter of 10.4 meters (the drilling diameter of mainstream equipment at home and abroad is 4.7-6 meters), and uses an intelligent drilling control system to make the equipment easy to operate and realize drilling. One-click start of construction. Its super-torque drive system can provide power support for rapid excavation. In fully weathered and moderately weathered rock formations, the drilling speed of this equipment can reach 20-40 mm/min, and the drilling speed of slightly weathered and weakly weathered rock formations can reach 10 mm/min. Minutes, comprehensive capacity and drilling speed are ahead of the current domestic and foreign traditional equipment.

Source: China Energy Network


7. 134 meters! The longest driven pile in the country takes root on the seabed

On June 6, in the stormy and surging east waters of Cangnan County, Zhejiang Province, with the 1223th hammer of the piling ship "Xiongcheng 3", the Huaneng Cangnan No. 4 offshore wind power project No. 25 was constructed by the Third Navigation Bureau. The last steel pipe pile of the aircraft was successfully inserted into the seabed.

It is reported that after the project is completed and put into production, it is expected to generate 1.2 billion kWh of electricity per year, which can be used by 480,000 households for a year, and can reduce carbon dioxide emissions by about 1 million tons per year, which will effectively help Wenzhou Cangnan to build a "national clean energy development demonstration site. ".

Source: China Communications Sanhang Ningbo Branch


8. The domestic largest cable-carrying cable-laying vessel "Dejing 106" was successfully delivered

On June 7, Dejing Group held the handover ceremony of the "Dejing 106" cable-laying vessel in Nantong, Jiangsu.

The "Dejing 106" cable-laying vessel is 106 meters long, 33 meters wide, 6.5 meters deep, 4.7 meters draft, and 10970 tons deadweight, including 8,000 tons of cable. The ship is equipped with a power rotating cable storage tank with a diameter of 30.5 meters, which can undertake submarine cable laying facilities for a single AC 220kV 3*500 70km, a single AC 220kV 3*1000 60km, and a single flexible DC ±400kV 1*1200 120km. It is currently the largest cable-carrying vessel in China.

Source: Dongqiao New Vision


9. GE Haliade-X marine giant model received typhoon certification

Recently, GEHaliade-X offshore wind power 12MW and 13MW units have once again achieved an important breakthrough. This model has obtained the T-level (Typhoon-level) certification issued by the authoritative independent certification organization DNV. Effectively resist extreme wind conditions such as typhoons during the cycle, and maintain safe, efficient and stable operations. This means that the application of the unit to offshore wind farms in areas where typhoons and hurricanes are active in the southeast coast of China, Japan, South Korea, and the United States will accelerate the pace of commercialization. Provide practical industry solutions for the energy transition.

At present, GE's Haliade-X series fans have a single unit capacity of up to 14MW. Each Haliade-X 14MW wind turbine can produce 74 million kilowatt-hours of electricity a year and reduce carbon emissions by 52,000 tons-equivalent to the annual carbon emissions of 11,000 cars.

Source: GE


10. Completed wind turbine installation in Denmark's largest offshore wind farm

On June 5, the installation of the last wind turbine of Kriegers Flak, Denmark's largest offshore wind farm, was completed. The wind farm has a total of 72 wind turbines. The next step will be to complete the wind farm's testing and certification.

The Kriegers Flak offshore wind farm is located in the Baltic Sea, 15-40 kilometers from the Danish coast. The wind farm covers an area of 132 square kilometers, with approximately 170 kilometers of submarine cables laid. It uses Siemens Gamesa's 8.4MW wind turbine model. The wind turbine has a total height of 188 meters and each base weighs 800 tons.

The maximum power generation capacity of the wind farm is 604MW, which can meet the annual consumption of about 600,000 Danish households. After the completion of Kriegers Flak, it will become Denmark's largest offshore wind farm so far, and will increase Danish wind power production by approximately 16%.

Source: Dongfang Wind Power Network


11. The United States plans large-scale floating wind power in the Pacific Ocean!

Recently, the Biden government announced an important plan: to open the first commercial-scale offshore wind power project on the Pacific Coast and develop offshore wind power along the northern and central coasts of California. The White House said that the first planned area for offshore wind power in the Pacific Ocean can provide up to 4.6GW of clean energy, enough to power 1.6 million American homes.

The U.S. Department of the Interior and the Department of Defense have identified an area in the northwestern part of Morro Bay—Morro Bay 399 Area, which belongs to the central coast of California, covering an area of approximately 1,033 square kilometers and an estimated installed capacity of 3GW. Another potential development area-Humboldt Call Area, located in northern California, is being promoted by the Department of the Interior. It is reported that the first auction of California waters is expected to be held in 2022.

Source: European offshore wind power


12. The world's first offshore wind power hydrogen production plant is about to go online!

An offshore hydrogen production plant powered by floating wind turbines is scheduled to be put into operation in France next year. This hydrogen production system will be installed in the SEM-REV demonstration wind farm on the coast of Le Crosic, France, and will be connected to the Floatgen floating wind turbine. This will be the world's first green offshore hydrogen production facility to be put into operation.

The project will be established by the French renewable hydrogen project developer Lhyfe in cooperation with Chantiers de l'Atlast. The latter will install electrolyzers on floating platforms based on GEPS technology and connect them to various marine energy sources including Floatgen wind turbines. renewable energy.

Source: Longchuanfeng Power Grid