1. Jiangsu Province issued the "Implementation Opinions on Promoting High-Quality Development and Doing a Good Job in Carbon Neutralization"

A few days ago, the Jiangsu Provincial Party Committee and the Provincial Government issued the document "Implementation Opinions on Promoting High-Quality Development and Doing a Good Job in Carbon Neutralization", which pointed out the need to vigorously develop non-fossil energy. Vigorously develop new energy, develop nuclear power in an orderly manner on the premise of ensuring safety, develop hydrogen energy in a standardized and orderly manner, and promote the integrated development of wind, solar, water, fire and storage. Accelerate the large-scale development of offshore wind power and the comprehensive utilization of "photovoltaic +", and steadily promote the survey and efficient comprehensive utilization of geothermal energy. Vigorously implement renewable energy alternative actions, and support coastal areas to build demonstrations of renewable energy development.

Source: General Office of the CPC Jiangsu Provincial Committee

2. 2.65GW! National Energy, Guoxin and Three Gorges were selected for the competitive configuration of Jiangsu Province's 2021 offshore wind power projects

According to the "Jiangsu Province Offshore Wind Power Resource Allocation Plan" and the relevant work rules, in accordance with the principle of fairness and justice, after strictly implementing the expert review and government decision-making procedures, the Sheyang 1 million kilowatt offshore wind power project was determined to be owned by the National Energy Investment Group Co., Ltd. The leading consortium was selected, the Dafeng 850,000-kilowatt offshore wind power project was selected by the consortium led by Jiangsu Guoxin Group Co., Ltd., and the Dafeng 800,000-kilowatt offshore wind power project was selected by the consortium led by China Three Gorges Corporation.

Source: Jiangsu Provincial Development and Reform Commission

3. State Grid Intelligent Research Institute won the bid for the German offshore wind power flexible DC transmission project

On February 14, local time in Germany, Tennet, a European transmission grid operator, issued a bid-winning notice, confirming that the consortium consisting of State Grid Smart Grid Research Institute Co., Ltd., McDermott of the United States, and NARI Group CLP Power Engineering Co., Ltd. is Borwin6 Offshore EPC general contractor of wind power flexible DC transmission project.

The winning of the bid is an important achievement in promoting the implementation of the "one body and four wings" development and layout of State Grid Corporation of China. It marks the first time that my country's high-end power transmission technology has entered Europe, which will effectively promote the high-quality development of my country's semiconductor devices, high-end power equipment, offshore wind power and other related industries. .

Source: State Grid

4. The first affordable offshore wind power project in Shandong Province was approved

Recently, the Bozhong Offshore Wind Power Site A project with an installed capacity of 500,000 kilowatts developed by Shandong Energy Group has been successfully approved. This is the first affordable offshore wind power project in Shandong Province and the first offshore wind power project in China after entering the parity era. The approved project marks that offshore wind power has officially entered the era of affordable development.

At present, the project has completed the EPC general contracting bidding and has the conditions for full-scale construction.

Source: Shandong Energy

5. Dongfang Electric Group and Fujian Provincial People's Government signed an industrial development cooperation agreement

On February 21, China Dongfang Electric Group Co., Ltd. and the Fujian Provincial People's Government signed an industrial development cooperation agreement in Fuzhou. Yin Li, Secretary of the Fujian Provincial Party Committee, expressed the hope that the two sides will turn consensus into actions and actions into results, and continue to deepen cooperation in new energy and new industries such as offshore wind power, hydrogen energy and energy storage, and environmental protection, so as to provide a more stable environment for economic and social development. Power guarantee, promote the optimization of energy distribution in Fujian Province, green and low-carbon development, and achieve mutual benefit and win-win for both parties.

Source: Dongfang Electric

6. The largest single machine in Asia! Domestic self-developed 13MW offshore wind turbine successfully rolled off the production line

On February 22, the 13-megawatt typhoon-resistant offshore wind turbine independently developed by China Dongfang Electric Group Co., Ltd. with completely independent intellectual property rights was successfully rolled off the line in Fujian Three Gorges Offshore Wind Power Industrial Park. The wind turbine with the largest single-unit capacity and the largest impeller diameter in Asia is also the first 13-megawatt wind turbine off the assembly line in my country.

The 13-megawatt offshore wind turbine adopts a customized anti-typhoon strategy developed by Dongfang Electric Group, which can withstand a super typhoon of 77 m/s and is suitable for 98% of my country's sea areas. The blades matched with the unit use the carbon fiber pultrusion process for the first time, breaking through a series of problems in the development of 100-meter-level ultra-long flexible blades. The length of a single blade is 103 meters, setting a new record for the longest wind power blade in my country; the pitch system adopts the industry's first innovative blade. The dual-drive electric pitch system has redundant design functions, high safety and good reliability; the generator capacity covers a wide range, the wind energy utilization rate is high, the operation is reliable, and the maintenance cost is low.

Source: Dongfang Electric

7. The first pile of China Resources Power Zhejiang Cangnan 1# Offshore Wind Power Project was shipped

On February 22, the first pile of China Resources Power Cangnan 1# Offshore Wind Power Project was successfully shipped, marking the official start of the large-scale offshore construction of the project.

An offshore wind turbine consists of a nacelle, an impeller, a tower, and a monopile, which is the foundation part of an offshore wind turbine. The 41# single pile shipped this time is the first batch of 10MW fan foundations built in China. The pile is 109.0m long, 7.5-9m in diameter and 1857.2t in weight.

China Resources Power Cangnan No. 1 offshore wind power project is one of the offshore wind power projects with the most complicated sea conditions and sea geological conditions in China, and it is the first affordable offshore wind power project in my country to start construction. The project is located in the eastern sea area of Cangnan County, Zhejiang Province, with a planned installed capacity of 400 MW. It is planned to install 24 units of 6.25 MW and 25 units of 10 MW.

Source: China Resources Power

8. The fourth-generation wind power platform H6017 built by Huangpu Wenchong was docked

On February 21, the 2,000-ton self-elevating and self-propelled integrated offshore wind power installation platform (H6017) built by Huangpu Wenchong, a subsidiary of China State Shipbuilding Corporation for the Yangtze Three Gorges Equipment and Materials Co., Ltd., was loaded into the dock, two days earlier than the original plan. The prelude to the continuous loading of docking. H6017 is about 126 meters long, 50 meters wide and 10 meters deep. It has advanced design and strong and flexible power, and can be used for the installation of offshore wind turbines of 10MW and above.

Source: CSSC Huangpu Wenchong

9. Jiangsu Dayang Haizhuang 3000T crane ship "Yongjian 3000" was successfully launched

On February 21, the 3000T azimuth crane "Yongjian 3000" built by Jiangsu Dayang Marine Equipment Co., Ltd. (hereinafter referred to as "Jiangsu Dayang Marine Equipment"), a subsidiary of China Aerospace Science and Industry Corporation, for Zhoushan Yongjian Marine Engineering Co., Ltd. Under the witness of company leaders and CCS classification society, the water was successfully received.

"Yongjian 3000" is a non-self-propelled crane vessel with box-shaped hull, bottom rounded bow, right-angled stern, square bilge, longitudinal framing type, single continuous deck steel welded structure. A heavy-duty crane with a lifting capacity of 3000 tons (back pull) / 2400 tons (full rotation) is installed on the port side of the stern, which can perform offshore wind power piling and installation and lifting and installation of marine structures and other offshore lifting operations. The construction period of the ship is 14 months and is expected to be delivered in May this year.

Source: Oceanic Seawear

10. The German Rheinland Group and Tata Power have reached a cooperation to focus on the development of offshore wind power projects in India

German energy giant RWE and India's Tata Power announced on Monday a partnership to focus on developing offshore wind projects in India. Rheinland Renewables and Tata Power Renewables Ltd have signed a memorandum of understanding on the scheme, the companies said.

Source: Zhitong Finance

  

11. The first order of the new model! Siemens Gamesa wins another super large order for offshore wind power!

Recently, Siemens Gamesa signed an agreement with Equinor and Polenergia to provide 1440MW wind turbines for two offshore wind power projects of MFW Baltyk II and Baltyk III in Poland. All the projects use Siemens Gamesa SG 14-236 DD offshore wind turbines. This is not only the first order for offshore wind turbines won by Siemens Gamesa in Poland, but also the first order for new models of SG 14-236 DD offshore wind turbines.

The two projects won by Siemens Gamesa are 720MW each. The wind turbines are scheduled to be delivered in 2024 and the first kilowatt-hour of electricity will be generated in 2027.

Source: WindDaily